Fusionet
Your Cart
Your Cart: Empty
Location
Home / UV Cure Equipment / UV Flood Cure Equipment / SunRay Economical UV Flood Curing system

SunRay Economical UV Flood Curing system


Features:
- 175 mW/cm2 intensity @ 3" - 600W
- 115 mW/cm2 intensity @ 3" - 400W
- 8" x 6" UV cure area
- Solid state - constant power
- Optional UV cure chamber
- Optional Stand & Shields
- Standby Power Switch

About SunRay UV Flood Cure Systems

SunRay 400 and SunRay 600 UV Flood Cure Units are economical, high-powered UV flood curing systems. SunRay is a compact system, incorporating all components into a small lamp head which can be used as a stand alone system, or easily mounted on the optional Stand & Shield, Rayven UV Chamber, UV Conveyor 40, or anywhere on a factory floor, with virtually no cabling or remote power boxes required. Just mount the head, connect the AC line cord, and start curing! The long life 400 watt or 600 watt arc lamp and parabolic reflector illuminate an 8" x 6" curing area with evenly distributed UV light. The arc lamp is powered by the state of the art UV Power-Plus Lamp Driver. The head features a convenient carrying handle and sliding height adjustment bracket..

Elapsed Hour Meter
SunRay systems include an elapsed hour meter on the front panel to allow for consistent lamp replacement scheduling.

Lamp Power Regulation
SunRay's switch mode power supply with auto-ranging input maintains constant lamp power regardless of variations in AC line input or lamp voltages. This regulation provides for repeatable curing times and longer lamp life..

Standby Mode
SunRay includes a Standby Mode switch which reduces lamp power when the system is idling. This reduces excessive heat and therefore increases life of system components, without the need to power down.

Remote Control /Logic Interface
SunRay can be remotely monitored and controlled using a connector on the rear of the unit.

SunRay shown with front and rear UV shields Benchtop Mounting Options
The SunRay UV flood system can be mounted at a range of heights with the optional bench-top Flood Stand, and can also be configured with the wrap around Front and Rear UV shields, as shown.
SunRay UV Flood with Rayven Chamber SunRay as a UV Cure Chamber
SunRay can also be easily connected to the optional Rayven oven to create a powerful UV cure chamber.

SunRay Information Sheet

Uvitron Flood System Mounting Options

Item Number:
SunRay UV Flood Curing System
Your Price:
$2,110.00 $2,065.00 (Save 2%)
Your Total:
Quantity:

Lamp Wavelength and Power

Lamp Wavelength and Power*
UVA 316nm-400nm 400 Watt
UVB 280nm-315nm 400 Watt ($81.00)
Visible 420 Ctr 400 Watt ($118.00)
Visible 460 Ctr 400 Watt ($251.00)
UVA 316nm-400nm 600 Watt ($36.00)
UVB 280nm-315nm 600 Watt ($161.00)
Visible 420 Ctr 600 Watt ($252.00)

Bench-top Mounting Options

Benchtop Mounting Options
Adjustable Flood Stand UV0454 ($264.00)
Front Wrap-Around UV Shield UV0455 ($225.00)
Rear UV Sheild UV1094 ($169.00)

Raven UV Curing Chamber

Raven UV Curing Chamber
Raven UV Curing Chamber ($1,240.00)
SunRay Economical UV Flood Curing system
SunRay Economical UV Flood Curing system
SunRay Economical UV Flood Curing system
SunRay Economical UV Flood Curing system
SunRay Economical UV Flood Curing system
SunRay Economical UV Flood Curing system
Specifications
Specifications
System Type Parabolic Flood Curing System
Part # UV0446 UV0830
Lamp Power 400W 600W
Input Voltage 100-120 / 200-240 VAC ±10% (auto-ranging)
Input Current (Max) 7.0/3.5 Amps 10.0/5.0 Amps
Irradiance
@ 3"
115 mW/cm2 UVA, typical 175 mW/cm2 UVA, typical
Curing Area 8" x 6"
Weight 11 lbs.
Size (L x W x H) 11” x 10” x 9”
© 2024 Fusionet, all rights reserved worldwide.
Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. - https://kryptronic.com/ [0.011415 / 1.293114]