About SkyBeam Multipole UV LED System
SkyBeam is a high-intensity cool-operation UV LED spot curing system widely used in bench-top and automated production lines. The system includes 0ne long-life LED light guide, and supports up to 4 independently operating LED light guides with a variety of lens types. SkyBeam features easy to use exposure time controls and foot pedal activation. The unit is compact and portable, with a built-in power supply, weight of 1.5 kg, and dimensions of 140 mm x 92 mm x 160 mm.
Up to 4 Independent Irradiation Channels
SkyBeam features 4 independent irradiation channels, each with 0-999.9 second exposure timer and 10 to 100% power adjustment range. Each channel’s UV light spot size can be adjusted by replacing the optical lens at the end of its light guide, with the service life of each irradiation channel independently recorded.
External Control Interface
SkyBeam can be remotely monitored and controlled using isolated logic signals available at the rear panel terminals. The digital logic functions allow high-speed control of SkyBeam for applications requiring a direct interface with machine controllers or PLCs. Control signals include LEDs on/off and a safety interlock that disables LEDs for operator protection. Monitoring signals include system ready, LEDs on and system alarm. An RS232 port is also provided for serial communication with PCs and PLCs.
Long Life Flexible LED Light Guides
The cable of the UV LED light guides is a 2 meter flexible robot cable, tested to over 10 million bending cycles. 4 wavelengths are available, including 365, 385, 395 and 405 nm.
Each pole, or Light Guide, includes one 6mm lens and one 12mm lens. See SkyBeam UV Multipole System Info Sheet for more information about Light Guides and Lenses.
Both convection cooling and fan cooling UV LED light guides are offered. The fan cooling type has better heat dissipation and is suggested for continuous operation. The UV LED light guide has a built-in temperature sensor that monitors the temperature and prevents the light guide from overheating. The aluminum controller housing is fully sealed to prevent contamination and ensure long system life.
Security Key Switch
The system comes with a security key switch that prevents operators from making unauthorized changes to the approved running parameters.
|System Type||LED Spot|
|Input Voltage||100-240VAC ±10%|
|Input Current (Max)||1.0 Amps @120V,
0.5 Amps @ 240V
|Irradiance||From 1000 - 13,000 mW/cm2 UVA (lens dependent)|
|Curing Area||From 3 mm to 15mm spot size (lens dependent)|
|Size (H x W x D), Weight||140 mm x 92 mm x 160 mm, 3.25 lbs|